With the continuous improvement of the technology of silicone products manufacturers, silicone products have become more and more widely used in daily life, but some businesses have found a pungent odor when purchasing silicone products, so why do silicone products produce this? A pungent smell?

These problems are mainly due to the fact that some silicone products factories use standard or non-environmentally friendly materials that are not used by normal companies to save costs. Rather than an environmentally friendly, odorless vulcanizing agent that has been completely tested by ROHS, the vulcanizing agent is a catalyst that promotes the vulcanization and molding of silicone raw materials. Molding and volatilization after molding of silicone products will only leave a small amount of residues within 48 hours. Evaporation is complete.

1. Material reason: Silicone products may have a heavy odor. The manufacturer may use some inferior rubber such as recycled rubber oil. Secondly, oil is also one of the main factors. Oils with a low flash point or impure ingredients will follow. Emitted from the high temperature.

2. Vulcanization conditions: If the vulcanization temperature is too high or the vulcanization time is too long, the odor will increase.

3. Vulcanization system: Silica gel uses M, DM and other thiazoles with TT, the dosage should not be too high, and it will have a bad smell if it is too high.

The rubber material basically does not have a great taste. The taste problem is mainly the vulcanizing agent and vulcanizing machine mentioned above. The vulcanizing agent should be selected with an odorless vulcanizing agent. No smell. If the temperature is high, the product will be easily aged and the quality cannot be guaranteed.

So when purchasing silicone products, you must first look at the abrasion resistance, elasticity, tear strength of silicone products, and pay attention to odor. If these conditions are met, it means that the silicone products are of good quality. Give up so as not to cause financial loss.